Research Papers

• Industry: Electrical Equipment Manufacturers

How the GaGe Digitizer was used: The GaGe Digitizer was used in conjunction with a dual-
channel spectrum analyzer (SA) based on spatial-spectral (S2) materials. This setup monitored
the outputs of a dual-drive, dual-port optical Mach-Zehnder interferometer, which received
inputs mimicking signals from a two-element antenna array. The digitizer helped in capturing
and processing the signal data in real-time with high precision, allowing for sub-millisecond
updates and sub-megahertz resolution.

• Industry: Electrical Equipment Manufacturers

How the GaGe Digitizer was used: The GPS receiver employs a GaGe digitizer to sample
intermediate frequency (IF) GPS signals at a predetermined rate. These sampled signals are
stored in memory for subsequent processing. The receiver’s digital signal processor (DSP)
executes fast convolution operations on the stored signals to derive pseudo range information,
enhancing processing efficiency.

• Industry: Medical/Pharmaceutical

How the GaGe Digitizer was used: The GaGe Digitizer was utilized to capture and process
wideband signals transmitted through blood vessels. It tracked the movement of small blood
regions over a long pulse train, enabling precise velocity estimation, even at very low speeds
and near-perpendicular angles to the vessel.

• Industry: Medical/Pharmaceutical

How the GaGe Digitizer was used: The GaGe Octopus CompuScope PCI bus was employed
to digitize and record signals from the TlBr detectors. The data acquisition involved capturing
voltage signals from both anode pixels and the cathode, which were then analyzed using
custom Matlab code to ensure accurate gamma-ray detection and resolution.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe digitizer is implied to be part of the system
that captures and processes the reflected light. In this context, it would be used to precisely
measure the time of flight of light pulses after they bounce off a diffuse reflector, aiding in the
reconstruction of the hidden object’s 3D structure.

• Industry: Medical/Pharmaceutical

How the GaGe Digitizer was used: The iNIRS system employs a Mach-Zehnder
interferometer with a frequency-swept narrow linewidth laser to measure spectral interference
fringe patterns. Fourier analysis of the detected signal enables TOF-resolved intensity
determination, crucial for quantifying optical properties and dynamics simultaneously.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: The paper introduces continuous wave cavity ring-down
spectroscopy (CW-CRDS) as a highly sensitive technique to measure VDFs, overcoming
limitations of LIF. The GaGe digitizer was employed to record ring-down times in the optical
cavity, enabling precise measurements of absorption coefficients and VDFs.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: In Phase IV testing, the GaGe digitizer was integral to
the PulseEcho system. It was triggered by an Agilent waveform generator to eliminate previous
jitter issues. The digitizer converted ultrasonic signals from the transducers into digital data for
real-time analysis, allowing the system to detect and measure the settled particles in the slurry
accurately.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe Digitizer, with its high sampling rate of up to 40
M samples/s and 8-bit resolution, was used to capture high-frequency electromagnetic (EM)
emissions induced by seismic waves passing through sulphide orebodies. This device provided
clearer, more detailed signals compared to previous equipment, allowing for better analysis and
understanding of the seismoelectric phenomenon.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: Incorporating innovative hardware design and signal processing
techniques, the system efficiently measures ozone concentration and aerosol profiles. A recent
addition of a 2D scanning system enhances its capabilities, allowing measurements in a vertical
plane.