Vitrek Legacy Products

Vitrek 944i Dielectric Analyzer and 930i Ground Bond Tester

This product line has been replaced by the 95x Series.

950 Series

Vitrek V3, V50 & V60 Series (V3, V50, V51, V52, V53, V60, V61, V63, V4) Testers

This product line has been replaced by the V7X Series.

Vitrek 4600, 4600A, and 46XXB Series High Voltage Meters

This product line has been replaced by the 4700 HV Meter.

950 Series

Vitrek 948i High Voltage Switching System

This product line has been replaced by the 964i High Voltage Switching System.

950 Series

Vitrek Software Packages

Legacy Vitrek Software
* These packages are for legacy products, for the latest version see QTEnterprise Software.

Vitrek Legacy Product Test Leads & Accessories

Test leads and accessories for legacy Vitrek Products may be available. Contact Vitrek directly for details at info@vitrek.com

XiTRON Legacy Products

 XiTRON 1594 Voltmeter

This product has been discontinued.

*186k, LabView7.11) This software allows the user to set up the 1594 and collect data, view the data and write it to a file.

6010 Portable Phase Angle Voltmeter

These products has been discontinued.

Downloads

6010 Datasheet

6010 User Manual

* There is no field upgradeable firmware for this product.

4000, 4000+ & 4000B Utilities

These products has been discontinued.

BIS4000
*BIS4000 version 1.0c for 4000 and 4000+ instruments. Written for DOS operating systems. 207k ZIP

BIS4000B
*BIS4000 version 1.0d for 4000B with firmware C:01 244k ZIP

 XiTRON 1596 Ballast Interface Matrix Switch

This product has been discontinued.

247xR Series Ballast Analyzer

These products has been discontinued.

Vitrek Xitron 257xR Ballast analyzer

Download Datasheet
Download User Manual
Download 257xR Config25 LV711.zip-* Version 2.5, (1M, LabView 7.1.1) UPDATED Sep 28, 2005 – This application allows complete 257xR series instrument setup from a single screen using pull-down menus. It also provides a simple and efficient way to create automatic test sequences, including entering test limits.
Download 257xR Charts-* (1832, PDF) These are the diagrams defining the wiring based upon the chart number.
Download 1500 Load Card Programming– * (86k LabView 6.0) – Allows you to reprogram the ID codes and the load and filament values.
Download 1560/1561 Programmable Load Card-* (9k, PDF) 2574R ID codes for Configuration, Test Sequence and Limits. (53K, PDF)
Download 257xR Configuration String Example (1K, TXT)
Download 1560 Variable Load Card Codes Vs. Resistor Values.zip (23K, Labview 6.0)
Download 257xR Firmware Release Notes (v6.00, 74K PDF) – *Please read this before upgrading your 257xR with new firmware.
Download 257xR Firmware Release Notes (V5.1.2, 51K PDF – *Please read this before upgrading your 257xR with new firmware.
Download 257xR Firmware Release Notes (V4.2.3, 51K, PDF) – *Please read this before upgrading your 257xR with new firmware.
Download 257xR 1500 Upload.zip – *(66k LabView 6.0) Allows you to upload new flash firmware into the 2574R, 1500 and the 1596 controllers.
Download 257xR Display Data and Config LV2012.zip – *(500k LabView 2012) UPDATED Sep 29, 2016 – This application allows the user to view most all numeric and graphical data normally displayed on the 257xR front panel. Data can also be downloaded to a file. It provides for complete 257xR series instrument setup from a single screen using pull-down menus.
Download 257xR Restrike Configuration Notes (12K PDF)

1510 Line/Load Chassis

These products has been discontinued.

Xitron Vitrek 1500 Load Chassis

Download 1500 Load Card Programming.zip-*(86k, IEEE LabView 6.0) – Allows you to reprogram the ID codes and the load and filament values. Word doc is included.
Download Controller Command Set-*GPIB Controller (18k, PDF)
Download 1560 Variable Load Card Codes vs. Resistor Values.zip-* 23k, LabView 6.0
Download 257xR 1500 Uploads.zip-*(66k, LabView 6.0) Allows you to upload new flash into the 2574R, 1500 and 1596 controllers.

XT560B Digital Milliohmmeter

These products has been discontinued.

vitrek xitron xt560 milliohmmeter

2000 Series Portable Calibrator

These products has been discontinued.

 XiTRON XT1600 Portable Micro-Spectrometer

This product has been discontinued.

vitrek xitron 1600 microspectrometer

 XiTRON 2503 Power Analyzer

This product has been discontinued.

Downloads

2503 User Manual

2503 Methods Guide

* This guide contains details regarding the techniques used in XiTRON 2503 power analyzers to produce the measurement results.

 XiTRON 2551 Power Analyzer

This product has been discontinued.

2551 Datasheet

2551 User Manual

2551 Sample Application

*311k Labview 6.1 – Displays volts, amps and watts. Source 465k

2551 Methods Guide

*900k PDF – This guide contains details regarding the techniques used in the 2551 XiTRON Power Analyzers to produce measurement results.

*63k Labview 6 – Use this to upload new firmware into a 2551 or 2553.

*130k LabView 7.11 – Displays several voltage, current, power and accumulated power parameters, plus V and I graphs. Allows for logging data to a file.

2551 Command Guide

2551 Two Units Application

* 441k LabView 7.1 – This application combines two 2551s with GPIB to create a cost effective single-phase efficiency measurement.

 XiTRON XT3561 Portable Power Analyzers

This product has been discontinued.

Xitron 3560 portable PQ analyzer

XT2640 Power Analyzer

These products has been discontinued. See Vitrek Power Analyzers.

xitron vitrek XT2640 power analyzer front

 XiTRON 2503AH Series Power Analyzers

This product has been discontinued.

xitron vitrek 2503 power analyzer front
Downloads
Download Methods Guide-*900k, PDF – This guide contains details regarding the techniques used in the 2503 Power Analyzers to produce the measurement results.
Download 2503AH-RS232.zip-*464k, RS232 LabView 6.0 – This application displays four parameters and optionally writes them to a log file. Source 744k and Documentation.doc (43k) are included in the zip.
Download 2503AH-3CH-Demo.zip-*144k LabView 6.0 – Updated 7-23-01 – This application displays many parameters from a 3 channel analyzer.
Download 2503AH-WAVEDISP_711.zip-*56k LabView 7.11 – This application allows the user to display current and voltage waveforms as measured by the 2503AH power analyzer as well as voltage and current harmonics bar charts.
Download IEC1000.ZIP-*This is the IEC1000-2 and IEC1000-3 software that is supplied with the product.

 XiTRON 2553 Series Power Analyzers

This product has been discontinued.

xitron vitrek 280x power analyzer
Downloads
Download 2553 XView Example-*140k, LabView 7.0 – Displays most relevant parameters plus voltage and current graphs, and allows the user to log data to an Excel-compatible file.
Download 2553 Methods Guide-*900k, PDF – This guide contains details regarding the techniques used in 2553 power analyzers to product the measurement results.
Download 2553 Input/Output Zip-*148k, LabView 7 – This application combines two 2553s with IEEE to create a cost effective three-phase efficiency measurement.
Download 2551/2553 Upload Utility-*63k, LabView 6 – Use this to upload new firmware into a 2551 or 2553.

 XiTRON 2580X Series Power Analyzers

This product has been discontinued.

xitron vitrek 280x power analyzer
Download 280x USB Driver -32 Bit – 3.8M zip file – This zip file contains the latest 280x USB driver for 32-bit operating systems. This file includes the DLL. 01 Apr 2009
Download 280x USB Driver – 64 Bit-3.9M zip file – This zip file contains the latest 280x USB driver for 64-bit operating systems. This file includes the DLL. 01 Apr 2009
Download 280x DLL Functions-This PDF lists the function calls to the DLL 12-June-2012
Download 280x XView Application-470k, USB, LabView 8.6.1 – This software displays many of the 280x parameters on a single screen, allows for snapshot recording of the data or continuous logging of data to an Excel-compatible file. It also displays the harmonics and distortion graphs.
Download 2801 AEnergy Star Desktop Notebook Computers-560k, USB, LabView 8.2 – This XView software is based on LabView 8.2. It automates the data collection and reporting for the ENERGY STAR Program Requirements for Computers: Version 4.0 – 19 Sept 08
Download 280x Energy Star Consumer Audio-492k, USB, LabView 8.2- This XView software is based on LabView 8.2. It automates the data collection and reporting for the ENERGY STAR Program Requirements for Consumer Audio and DVD products. The zip file also includes the ENERGY STAR requirements document. 02 July 2007
Download 280x Energy Star External Power Supply-281k, USB, LabView 8.2- This XView software is based on LabView 8.2. It automates the data collection and reporting for the ENERGY STAR Program Requirements for single-voltage, external AC/DC and AC/AC power supplies.
Download 280x Energy Star External AC/DC Power Supply-167k, USB, LabView 8.2- This XView software is based on LabView 8.2. It automates the data collection and reporting for the ENERGY STAR Program Requirements for 03 Nov 2008

 XiTRON XT9812 Programmable DC Load

This product has been discontinued.

vitrek xitron xt9812 front

 XiTRON 6250/6260 Phase Angle Voltmeter

This product has been discontinued.

vitrek xitron phase angle voltmeter PAV
* 6000 Series Firmware Upgrade – There is no field upgradeable firmware for this product.
Download 6250 Demo Application
* This application displays 13 of the most popular 6250 PAV measurements plus the voltage waveforms for both inputs on a single screen.
* 6250 Firmware Upgrade – There is no field upgradeable firmware for this product.

Dynamic Signals, GaGe, Signatec, KineticSystems Legacy Products

GaGe PCI CS1250X

Discontinued Models:

  • CS12501 (120-501-001) = 1-CH, 12-bit, 500 MS/s, PCI
  • CS12502 (120-502-001) = 2-CH, 12-bit, 500 MS/s, PCI

The replacement model is PCIe based RazorPlus model = 2-CH, 16-bit, 500 MS/s, PCIe Gen3 x8

Razor 16-Bit PCIe Digitizer

16-bit/200 MS/10 MHz input.

View Legacy Product

This model is discontinued.

View Recommended Replacement

Oscar 16-Bit PCIe Digitizer

16-Bit, 100 MS/s, PCIe Digitizer / Oscilloscope

View Legacy Product

This model is discontinued.

View Recommended Replacement

Octave 16-Bit PCIe Digitizer

16-Bit, 25 MS/s, PCIe Digitizer / Oscilloscope

View Legacy Product

This model is discontinued.

View Recommended Replacement

Razor 14-Bit PCIe Digitizer

14-Bit, 200 MS/s, PCIe Digitizer / Oscilloscope

View Legacy Product

This model is discontinued.

View Recommended Replacement

Octave 14-Bit PCIe Digitizer

14-Bit, 125 MS/s, PCIe Digitizer / Oscilloscope

View Legacy Product

View Recommended Replacement

Razor 12-Bit PCIe Digitizer

12-Bit, 200 MS/s, PCIe Digitizer / Oscilloscope

View Legacy Product

This model is discontinued.

View Recommended Replacement

Signatec High-Speed Data Acquisition & Signal Recording Systems

For Legacy Signatec Product Support, Please submit a request through our GaGe Technical Support Request Form for assistance.

Kinetic Systems High-Speed Data Acquisition & Signal Recording Systems

For Legacy Kinetic Systems Product Support, Please submit a request through our GaGe Technical Support Request Form for assistance.

MTI Instruments Legacy Products

Accumeasure Wireless

A low bandwidth solution for applications where wires are impossible.

View Legacy Product

Complete Wireless Probe System

Gap Measurement Probes

A high-speed, multi-channel thickness, TTV and bow measurement module for in-process monitoring of solar/photovoltaic wafers and other materials.

View Legacy Product

PV1000 Photovoltaic/ Solar Metrology System

Suitable for industrial deployment, this pre-calibrated capacitive gap sensor system provides highly accurate measurements to a grounded metal target.

View Legacy Product

08 - 280-1125

Thickness Gauge System

Suitable for industrial deployment, this pre-calibrated capacitive gap sensor system provides highly accurate measurements to a grounded metal target.

View Legacy Product

08 - 280-1125