Research Papers

• Industry: Aerospace & Defense

Coherent Radar Measurements Using a Gage Sabre Digitizer A customer is conducting coherent radar measurements, including Synthetic Aperture Radar (SAR), and is focused on monitoring narrowband radar signals in the X-Band (8 to 12 GHz). To acquire these radar signals, the customer uses an RF down-converter to mix the X-band signals to lower frequencies. The […]

• Industry: Aerospace & Defense

A military customer conducts explosion testing at a proving ground, where ordnances are detonated in a controlled environment surrounded by a network of sensors. Data collected during the detonation are used to characterize the explosion, with particular focus on parameters such as explosion intensity, symmetry, and the velocity of the blast front. The two primary […]

• Industry: Aerospace & Defense

A military customer relied on a legacy 1980s avionics test system to certify Line replaceable Units (LRUs) for a jet platform. A critical instrument—a 2-channel, 8-bit,
200 MS/s box digitizer—was obsolete, required frequent calibration, and communicated via GPIB with outdated software. Replacing it was difficult because the new unit had to behave identically to the original to preserve system compatibility.

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

How the GaGe Digitizer was used:The GaGe Digitizer (model CS12400) was utilized to sample the signal received from the laser at a rate of 200 MS/s with a 12-bit resolution. This high sampling rate and resolution were essential for accurately capturing and analyzing the laser’s noise and coherence properties.

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe Applied Technologies digitizer (Cs8325 model) was utilized to capture and analyze the acoustic emissions from microbubbles during the focused ultrasound treatment. This real-time data acquisition helped monitor the effectiveness of BBB opening by recording the cavitation spectrum.

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

How the GaGe Digitizer was used: The study utilized a GaGe Applied Technologies digitizer model Cs8325 with a 50 MHz sampling rate to acquire data from the Optical Coherence Tomography (OCT) system. This digitizer played a crucial role in capturing high-resolution imaging data, which was essential for generating detailed OCT images of ovarian tissue.

• Industry: Medical/Pharmaceutical

How the GaGe Digitizer was used: The GaGe Digitizer was employed to digitize ultrasonic signals received from the lens at a high sampling rate. This allowed for the detailed analysis necessary for creating Nakagami parametric images.

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe Digitizer, specifically the CS 14200 model, was employed to digitize and save photoacoustic signals in the experiments. These signals were crucial for rendering high-resolution images of stem cells labeled with gold nanocages.

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

The GaGe Digitizer was used to measure the electrical field induced by the TMS coils. The digitizer recorded the voltage differences captured by a dipole probe in the head model, allowing researchers to compute the electrical field strength and distribution.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: Scintillation light yield (LY) was measured using a GaGe
digitizer coupled with photomultiplier tubes, crucial for assessing crystal performance. Growth
employed temperature reduction techniques, refining crystal quality.