Research Papers

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe Digitizer was employed in the frequency-
stabilized cavity ring-down spectroscopy (FS-CRDS) setup. It facilitated the precise
measurement of spectral lineshapes of gases such as O2 and CO2 and the accurate detection
of methane isotopes by capturing rapid decay signals, enhancing the precision and sensitivity of
the measurements.

• Industry: Aerospace & Defense

How the GaGe Digitizer was used: The paper introduces innovative approaches, such as
the use of inductance-capacitance (LC) resonance method to improve sensor sensitivity.
Additionally, it presents the design and implementation of an integrated oil condition sensor for
simultaneous detection of wear debris and other lubricant properties.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe digitizer, operating at a 10MHz sampling
rate, played a crucial role in recording waveforms during trap cycles, allowing for detailed data
acquisition and analysis. It provided a significant upgrade over previous data acquisition
systems, enabling the detection of multiple protons and investigation of backgrounds.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe digitizer, a high-speed data acquisition
device, was employed to enhance the resolution and accuracy of metallic magnetic calorimeters
(MMCs). This digitizer was critical for sampling and converting analog signals to digital, allowing
precise measurements of gamma rays. It provided the necessary flexibility with selectable input
voltage ranges and variable acquisition rates, essential for optimizing the performance of the
MMCs.

• Industry: Electrical Equipment Manufacturers

How the GaGe Digitizer was used: The GaGe digitizer was used to collect and analyze
data from a measurement campaign in urban and rural areas. It measured PLC channel impulse
responses and sampled additive noises, providing detailed insights into channel characteristics
and noise behavior, crucial for evaluating inductive coupling’s viability.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe Digitizer was employed to capture high-
resolution data from the magnetic microcalorimeters (MMCs) during gamma spectroscopy. It
facilitated the precise measurement of gamma-ray signals, enhancing the detection and
analysis capabilities of the MMC g-spectrometer.

• Industry: Medical/Pharmaceutical

How the GaGe Digitizer was used: The GaGe digitizer, with its high sampling rate, was
instrumental in capturing detailed echo signals from the high-frequency ultrasound array. It
enabled precise measurement of the array’s performance, including bandwidth, sensitivity, and
resolution. This high level of detail is essential for developing a system capable of visualizing
minute structures within the breast, thereby enhancing biopsy accuracy.

• Industry: Medical/Pharmaceutical

How the GaGe Digitizer was used: The study utilizes Acousto-Optical (AO) imaging, which
combines ultrasound probing with light to enhance spatial resolution. Using a GaGe Digitizer,
the researchers demonstrate quantitative measurements of absorber concentration within
scattering media by employing multiple-wavelength AO imaging.

• Industry: Testing Labs & Research Centers

How the GaGe Digitizer was used: In this research, extinction measurements were taken at
two infrared wavelengths, 1.06 and 10.6 microns, to study the dense region of the diesel fuel
sprays. These measurements help in determining droplet sizes and their distribution within the
spray.

• Industry: Electrical Equipment Manufacturers

How the GaGe Digitizer was used: In this research, a 16-bit 200 MS/s GaGe digitizer card
was employed to capture outputs from balanced detectors in the spatial-spectral (S2) system.
This digitizer recorded the readout spectra from the S2 materials, enabling detailed post-
processing to recover and analyze the spectral data.