-
Rear Panel Output Terminals -
Rear Panel Only Output Terminals
-
DUT Isolation Option. Option HSS-1 adds the ability to measure AC or DC breakdown and/or leakage into a grounded DUT. (This option may be fitted in a 951i, 952i, or 956i)
-
Pulse Mode / High Speed Flash Test Option
-
Universal Power Receptacle Hipot Test Adaptor. Receptacle accepts popular North American, European & Asian style power cords, for easy hipot test connection of corded products. 4ft leads. -
Universal Power Receptacle Hipot & GB Test Adaptor. Receptacle accepts popular North American, European & Asian style power cords, for easy Hipot & Ground Bond test connection of corded products. 4ft leads. -
Universal Power Receptacle GB Only Test Adaptor. Receptacle accepts popular North American, European & Asian style power cords, for easy Ground Bond test connection of corded products. 4ft leads. -
IEC 320 C13 Power Socket Hipot Lead Set. This test lead set makes a convenient connection to the IEC-320 C13 style power inlet of many products. The HV lead is connected to both the line and neutral pins, while the earth pin is connected to return terminal. 4ft leads. -
IEC 320 C13 Power Socket Hipot & Ground Bond Test Lead Set. This test lead set makes a convenient connection to the IEC-320 C13 style power inlet of many products. The HV lead is connected to both the line and neutral pins, while the earth pin is connected to source- & sense- terminals. -
IEC 320 C13 Power Socket Ground Bond Only Test Lead Set. This test lead set makes a convenient connection to the IEC-320 C13 style power inlet of many products. The earth pin is connected to source- & sense- leads. 4ft leads. *White Hipot test lead shown in photo is not included with TL-IEC3.
-
NEMA 5-15 Power Socket Hipot Test Adaptor Lead Set. Receptacle accepts NEMA 5-15 style North American power cords, for easy hipot test connection on corded products. 4ft leads. -
NEMA 5-5 Power Socket Hipot & Ground Bond Test Adaptor Lead Set. Receptacle accepts NEMA 5-15 style North American power cords, for easy hipot & GB test connection on corded products. 4ft leads. -
NEMA 5-15 Power Socket Ground Bond Test Adaptor -
HV Retractable Tip Test Pistol Test Lead Set. For the ultimate operator safety, the HV test probe is only exposed when pistol grip is held and trigger is engaged. 4 ft test HV lead length. -
Additional HV/Continuity Test Lead set. 3 piece, 4 ft length alligator test lead set for connection to HV output, return & continuity terminals. -
Heavy Duty HV Alligator Clip Test Lead Set. 4ft leads.
-
4-wire Kelvin Low Resistance Measurement Lead Set (10A Max). 4ft leads. -
Additional Ground Bond Lead Set. 4-Wire, 2 alligator clip test leads set, 4 ft length for connection to Ground Bond terminals. 10AWG high flex source wires & 18 AWG sense with 40A rated clips. -
40A Handheld Ground Bond Probe. Single Probe. 4 ft length for connection to Ground Bond terminals. Designed to be used with standard K-2R lead set or additional GBP1. -
High Voltage Warning Light. Bright LED warning light connects to V7X DIO port and illuminates when units is actively testing. Power supply and 6 ft connection lead supplied. -
Remote Start Switch. Connects to V7X DIO Port. For operator convenience, remote start switch may be located up to 6 ft from the tester. -
Remote Start Footswitch. Connects to the V7X DIO Port. For hands free operator convenience, remote start footswitch may be located up to 6 ft from the tester. -
Remote Start Switch -
Digital I/O Splitter. For applications requiring more than one device to access the DIO port, such as using a HV warning light and a remote start switch, the DIO-X2 allows 2 devices to plug into the V7X DIO port. -
USB A to RS232 (Serial) Adapter Cable (Requires RS-2) -
1 Meter Shielded GPIB (IEE-488) Cable -
High voltage switch system chassis with 8 card capacity and no cards pre-loaded -
Vitrek High Voltage Switching System - Pre-built with 2xHV7-8 (1 white, 1 black) cards & a hipot/cont Mux card. Kit includes cable/lead set to connect with Vitrek tester): one chassis grounding cable, VICL-2, 8xHVC-MW , 8xHVC-MB, external power supply with cord, operating manual & configuration diagram. -
-
Vitrek 964i High Voltage Switching System - Pre-built 964i with 6xHV7-8 (3 White, 3 Black) Cards and a Hipot/Cont Mux Card. Comes with: Interconnect Lead Set (for connection to Vitrek Tester), Chassis Grounding Cable, VICL-2, 24xHVC-MW, 24xHVC-MB, External Power Supply with Power Cord, Operating Manual & configuration diagram.
-
3kV Single Input Bus 8 Output Card with Red Banana Jack Terminals. Comes with: 8xRed Male Sheathed Banana Connectors. -
3kV Single Input Bus 8 Output Card with Black Banana Jack Terminals. Comes with: 8xBlack Male Sheathed Banana Connectors.
-
3kV Two Single Input Bus 4 Output Card with Black and Red Banana Jack Terminals.Comes with: 4xRed Male Sheathed Banana Connectors and 4xBlack Male Sheathed Banana Connectors.
-
3kV Dual Input (HV/Cont) Single Output (+) Bus.
-
7kV Single Input Bus 8 Output Card with White HV Terminals. Comes with: 8xWhite HV Male Sheathed Banana Connectors, (Part No. HVC-MW).
-
7kV Single Input Bus 8 Output Card with Black HV Terminals. Comes with: 8xBlack HV Male Sheathed Banana Connectors, (Part No. HVC-MB).
