Industry:
Medical/Pharmaceutical, Testing Labs & Research Centers
How the GaGe Digitizer was used: The GaGe Digitizer (CompuScope 12100) was utilized to digitize the signals received from the 10-MHz transducer. These signals, which were further amplified by an ultrasonic receiver, provided crucial data for analyzing the cavitation effects by measuring the inertial cavitation dose (ICD).
How the GaGe Digitizer was used: The GaGe Digitizer was employed in the frequency- stabilized cavity ring-down spectroscopy (FS-CRDS) setup. It facilitated the precise measurement of spectral lineshapes of gases such as O2 and CO2 and the accurate detection of methane isotopes by capturing rapid decay signals, enhancing the precision and sensitivity of the measurements.
How the GaGe Digitizer was used: The micropulse lidar system operates at two IR wavelengths: 1.545 µm and 4.55 µm, using innovative laser sources with low energy but high repetition rates. The system employs a GaGe digitizer for recording backscattered signals, enabling detailed analysis of aerosol and cloud properties.
Industry:
Medical/Pharmaceutical, Testing Labs & Research Centers
How the GaGe Digitizer was used: The GaGe Digitizer (CS14200) was integral in digitizing the pre-amplified echo signals at a high sampling rate of 200 MHz and 14-bit resolution. This process is critical for capturing high-quality ultrasound images, allowing for enhanced dynamic range and more accurate signal processing.
How the GaGe Digitizer was used: The GaGe Digitizer was employed in conjunction with various geophysical surveying methods, including Global Navigation Satellite Signal (GNSS) positioning, Radio Echo Sounding (RES), and active-source seismic surveying. These techniques helped in precisely mapping the grounding zone of the Kamb Ice Stream and detecting any sedimentary deposits.
Industry:
Medical/Pharmaceutical, Testing Labs & Research Centers
How the GaGe Digitizer was used: The GaGe Digitizer was employed to digitize ultrasonic
signals received from the lens at a high sampling rate. This allowed for the detailed analysis
necessary for creating Nakagami parametric images.
How the GaGe Digitizer was used: The GaGe digitizer, operating at a 10MHz sampling rate, played a crucial role in recording waveforms during trap cycles, allowing for detailed data acquisition and analysis. It provided a significant upgrade over previous data acquisition systems, enabling the detection of multiple protons and investigation of backgrounds.
How the GaGe Digitizer was used: The GaGe digitizer was employed to collect high- resolution power consumption data from cryptographic hardware during operation. This data was critical for analyzing power side-channel leakage. The captured power traces were subjected to various statistical tests, including mutual information (MI) analysis, to assess and compare their effectiveness in detecting information leakage.
Industry:
Medical/Pharmaceutical, Testing Labs & Research Centers
How the GaGe Digitizer was used: The GaGe Digitizer, specifically the CS 14200 model, was employed to digitize and save photoacoustic signals in the experiments. These signals were crucial for rendering high-resolution images of stem cells labeled with gold nanocages.
How the GaGe Digitizer was used: The GaGe Razor Express 1604 digitizer, with its high- resolution and fast sampling rate, was integral to capturing and recording the VHF signals and X-ray bursts from lightning. The digitizer allowed for precise synchronization and high temporal accuracy in the data collection, essential for correlating VHF pulses with high-energy radiation.
