Research Papers

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe Digitizer (likely model: CS14200, a 14-bit, 200 MS/s digitizer) was used to process cavitation signals during the focused ultrasound treatments. This involved driving the pulse-echo ultrasound transducer to acquire cavitation data, which is critical for quantifying the mechanical effects of FUS and ensuring precise and safe treatment parameters.

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

How the GaGe Digitizer was used: The researchers employed a GaGe CompuScope 22G8 digitizer to capture autofluorescence (AF) signals at a high sampling rate of 2 GS/s. Additionally, a GaGe CompuScope 14200 digitizer was used for digitizing photoacoustic (PA) signals at 200 MS/s.

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe Digitizer (CompuScope 12100) was utilized to digitize the signals received from the 10-MHz transducer. These signals, which were further amplified by an ultrasonic receiver, provided crucial data for analyzing the cavitation effects by measuring the inertial cavitation dose (ICD).

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

How the GaGe Digitizer was used: The GaGe digitizer, specifically the CS14200, is utilized to digitize beamformed radiofrequency (RF) data from the ultrasound front-end scanner. It samples data at a frequency of 200 MHz with 14-bit resolution, which is then transferred to a PC for further processing.

• Industry: Medical/Pharmaceutical, Testing Labs & Research Centers

How the GaGe Digitizer was used:The GaGe Digitizer was employed to capture and analyze ultrasound signals during the experiments. It was part of the setup used to ensure precise alignment and monitoring of the FUS application, playing a critical role in the accurate measurement of the BBB opening process.

• Industry: Electrical Equipment Manufacturers

How the GaGe Digitizer was used: The paper explains how a digitizing solution, including the GaGe CSE1622 digitizer, was employed alongside Nanoceptors to capture RF data swiftly and accurately. The Nanoceptor simplifies frequency tuning up to 3 GHz, while the digitizer records time-domain data at various sampling rates, providing a snapshot of spectral data in a fraction of a second.

• Industry: Aerospace & Defense

How the GaGe Digitizer was used: The research utilized a GaGe Razor Express 1604
digitizer, offering high-resolution data acquisition at a rapid sampling rate of 200MS/s. This
digitizer facilitated the simultaneous recording of lightning events and high-energy radiation
bursts, enabling detailed analysis.

• Industry: Electrical Equipment Manufacturers, Testing Labs & Research Centers

How the GaGe Digitizer was used: Data acquisition parameters are determined based on the required sampling frequency for different sweep rates of the radiated waves. The short sweep time of ultra-wide bandwidth of the reflectometer needs synchronization with the tokamak plasma pulse. An Ethernet-based LabVIEW application software was developed for simplified and remote operation of the reflectometer system, controlled by a single master TTL trigger.

• Industry: Aerospace & Defense

How the GaGe Digitizer was used: A VHF broadband interferometer (INTF) was developed,
comprising three antennas and a GaGe Razor Express 1604 digitizer. This setup facilitated the
precise mapping of lightning discharges with high temporal resolution.

• Industry: Aerospace & Defense

How the GaGe Digitizer was used: During Trial Petawawa 09-2, GAJET underwent comprehensive testing using up to three deployable jamming units (DJUs) transmitting jamming signals at the L1 GPS frequency. The GaGe digitizer played a crucial role in capturing and processing the received signals from the antenna array, enabling the implementation of digital beamforming algorithms to nullify the jamming signals.