MADE IN USA - BUILT FOR GLOBAL STANDARDS

Products-MTI-Capacitance

Navy Orders Avionics Test and Measurement Systems

The U.S. Navy wants new avionics test and measurement systems. Under the terms of a $109-million award, the Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey will buy 41 electronic consolidated automated support systems (eCASS) from Lockheed Martin. This test and measurement equipment helps soldiers and Marines troubleshoot and repair aviation electronics while at sea. Avionics, the electronics used in aircraft, support essential navigation and communications functions. With military aircraft, avionics typically include electro-optical, infrared, and other types of sensors for airborne radar, weapons systems, and heads-up displays. Military avionics also need to support electronic warfare systems, [...]

Accumeasure Analog Capacitance System

AS-9000 Accumeasure System 9000 High-Resolution Analog Capacitance Measurement System An ultra-high precision capacitive gap and displacement measurement gauge offering true nanometer accuracy and stability. Lightweight, compact, and designed for fast setup, the AS-9000 delivers exceptional reliability for your most demanding non-contact metrology applications. Request Quote Data Sheet Accumeasure Probes Brochure Push/Pull Probes Brochure PRECISE. COMPACT. FAST. Nanometer-Level Resolution for Critical Metrology The Accumeasure System 9000 (AS-9000) is a high-resolution, capacitance-based instrument that provides the perfect solution to previously unattainable measurement [...]

By |August 11th, 2017|0 Comments

Fiber Optic Sensor Principles

The Fotonic Sensor™ is a non-contact instrument, which uses the fiber optics lever principle to perform displacement measurement, vibration analysis and surface-condition measurements. The Fotonic Sensor transmits a beam of light through a flexible fiber-optic probe, receives light reflected from a target surface, and converts this light into an electrical signal proportional to the distance between the probe tip and the target being measured. A simplified example of the fiber optic principal is shown in Figure 2. The output signal voltage from the fiber optic sensor is then used to determine position, displacement, vibration amplitude, frequency and waveshape of a [...]

By |August 4th, 2017|Comments Off on Fiber Optic Sensor Principles

Offshore Wind Supply Chain Uses MTI Capacitance Sensors

Capacitance sensors from MTI Instruments are an important part of the supply chain for offshore wind (OSW) in New York State. According to a recent report from the Center for Economic Growth (CEG), New York’s Capital Region is home to MTI Instruments and dozens of other manufacturers who support this growing form of wind power. The Capital Region also offers essential infrastructure for OSW. As the CEG report explains, the New York State Energy Research Development Authority (NYSERDA) has assessed 54 waterfront sites for OSW-related projects such as component staging, manufacturing, and fabrication. Two of the most promising sites [...]

By |December 18th, 2018|Categories: Application Notes-MTI, Brand-MTI, Industry-Energy, News-MTI, Products-MTI-Capacitance, Z-REPUB, z1|Comments Off on Offshore Wind Supply Chain Uses MTI Capacitance Sensors

Digital Accumeasure Gen 3 Reduces Noise and Increases Resolution

MTI Instruments is announcing a third-generation digital capacitance displacement gauge with lower noise and an industry-leading resolution. The Digital Accumeasure DSeries Gen 3 provides up to 0.01% FST linearity and is designed for measuring gap, vibration, and positioning. In both analog and digital systems, noise is an unwanted disturbance that distorts or interferes with a desired electrical signal. MTI’s Digital Accumeasure Gen 3 is a lower-noise amplifier than the Gen 2 and features sub-nanometer resolution for highly-precise measurements. Using state-of-the-art technology, the Digital Accumeasure DSeries Gen 3 converts a highly-reliable capacitive electric field measurement (displacement) directly into a highly-precise [...]

By |November 19th, 2018|Categories: Brand-MTI, New & Press Releases, News-MTI-Instrumentation, Press Releases-Vitrek, Products-MTI-Capacitance, Z-REPUB, z1|Comments Off on Digital Accumeasure Gen 3 Reduces Noise and Increases Resolution

Accumeasure HD

Accumeasure HD-2 (D200HD) High Definition Digital Picometer Resolution Capacitance Measurement System The D200HD is a two-channel, picometer-scale, capacitance-based displacement measurement instrument for conductive targets. By utilizing external preamplifiers located close to the probes, it eliminates parasitic capacitance noise to deliver ultra-high resolutions as low as 20pm, setting a new standard for measurement accuracy. Request Quote Download Data Sheet HIGH-DEFINITION. PICOMETER RESOLUTION. DUAL CHANNEL. Unrivaled Precision for Critical Gap and Displacement Measurement The Accumeasure HD is a testament to MTI’s commitment to precision [...]

By |October 16th, 2020|0 Comments

Accumeasure Capacitance Sensors Overview

Accumeasure Capacitance Sensors Overview Accumeasure Series Request Quote Data Sheet Technology-driven measurement solutions for high resolution gap applications. The Accumeasure product line offers affordable, precise measurement solutions for a wide range of environmental conditions and configurations. The Accumeasure product line features capacitive sensor products for high resolution gap and displacement measurements that require a high level of accuracy that is both stable and repeatable. A capacitive sensing system consists of a probe and amplifier. Capacitive measurements can be performed in a multitude of environments using non-contact passive capacitance probes [...]

By |October 12th, 2020|0 Comments

MTI OEM Capacitance Products

MTI OEM Capacitance Products Capacitance Displacement and Gap Measurement Probes View Products Accumeasure OEM Boards View Products Custom Capacitance Sensors Measure displacement and gap with non-contact force at sub-micron resolution. Ideal for applications such as lobing, lens focusing, Piezo positioning, sheet metal thickness, gap measurement, as well as flatness and alignment test applications. Resources Capacitance Guide for Industrial Applications Capacitive Non-Contact Measurement Products Overview

By |January 14th, 2020|Comments Off on MTI OEM Capacitance Products

Selecting a Displacement Sensor / Measuring System

Capacitive displacement sensors Capacitive displacement sensors are non-contact devices that are used for measurements at a high-resolution. It can also be used to check the position of any conductive object as well as measure the width or density of non-conductive materials. Capacitive displacement sensors have a large variety of uses including precision thickness measurements, assembly line testing, assembly metrology, and semiconductor processing. Capacitive displacement sensors can be found in manufacturing facilities all around the globe. There’s more to selecting the proper type of displacement sensor and measurement system than meets the eye. To select the appropriate type of device [...]

By |August 29th, 2017|Comments Off on Selecting a Displacement Sensor / Measuring System
Go to Top