vitrek xitron xt9812 front

XT9812 Programmable DC Electronic Load

Download Data Sheet

Vitrek’s XiTRON XT9812 Programmable DC Electronic Load is designed for LED Driver or DC Power Supply Applications.

There is a special circuit that has been designed primarily for the LED driver. The design utilizes high performance semiconductors with high speed and high accuracy, and resolutions of 0.1 mV and 0.01 mA (the basic accuracy is 0.03%, the basic current rise speed is 2.5 A/us).

The XT9812 has wide applications from production line settings to the engineering bench. Target markets include the following type of manufacturers and markets; LED driver, cell phone charger, cell phone battery, electronic vehicle battery, switching power supply and linear power supply manufacturers, research institutes, automotive electronics, aeronautics and astronautics, solar cells and fuel cell markets

XT9812 DC Electronic Load

There is a special circuit that has been designed primarily for the LED driver. The design utilizes high performance semiconductors with high speed and high accuracy, and resolutions of 0.1 mV and 0.01 mA (the basic accuracy is 0.03%, the basic current rise speed is 2.5 A/us).

The XT9812 has wide applications from production line settings to the engineering bench. Target markets include the following type of manufacturers and markets; LED driver, cell phone charger, cell phone battery, electronic vehicle battery, switching power supply and linear power supply manufacturers, research institutes, automotive electronics, aeronautics and astronautics, solar cells and fuel cell markets.

XView Software Compatible

While all Vitrek precision test equipment is designed to be used in a completely stand-alone manner, there are times when external tools can aid or enhance the operation of an instrument. XView software tools and drivers are designed to help easily configure an instrument from a single screen, or are used to view a complete set of measurements in a single screen. Other XView tools are designed for data collection where results can be recorded in an Excel-compatible file for post-processing, insertion into reports, or simply for archival purposes.These precompiled applications can be downloaded from the Vitrek web site at www.vitrek.com. Often, Vitrek can provide the source code for a particular application, and it can be used as a convenient ‘starting point’ for a custom software application.

Product Features and Benefits

  • Six high speed operating modes: 1. Constant Current (CC); 2. Constant Resistance (CR); 3. Constant Voltage (CV); 4. Constant Wattage (CW); 5. Constant Current (CC) + Constant Voltage (CV); and 6. Constant Resistance (CR)+ Constant Wattage (CW)
  • LED mode supports LED power driver test, provides steady reading, and capacitance sensitive driver compatible
  • Over current, over voltage, over power, over heating and reversed polarity protection
  • High-luminance VFD screen
  • Intelligent fan system that is automatically activated based on temperature changes
  • Soft-start time setting runs the power supply according to the pre-set voltage value
  • Battery and short-circuit testing functions
  • Capable of dynamic testing with rising edge and falling edge settings
  • Supports external trigger of input and outpu
  • External current waveform monitor terminal
  • Supports remote voltage compensation and multi data storage
  • Power-on-self-test, software calibration ready, and standard rack mountable
  • Arbitrary waveform editing
  • USB Interface

XView Software Compatible

While all Vitrek precision test equipment is designed to be used in a completely stand-alone manner, there are times when external tools can aid or enhance the operation of an instrument. XView software tools and drivers are designed to help easily configure an instrument from a single screen, or are used to view a complete set of measurements in a single screen. Other XView tools are designed for data collection where results can be recorded in an Excel-compatible file for post-processing, insertion into reports, or simply for archival purposes.These precompiled applications can be downloaded from the Vitrek web site at www.vitrek.com. Often, Vitrek can provide the source code for a particular application, and it can be used as a convenient ‘starting point’ for a custom software application.

Specifications

General Specifications – For Full Specifications contact Vitrek

Ordering & Accessories

Below prices in US$ are for destinations in North America with terms of prepay, net 30 days (OAC) and accepted credit cards. For shipment beyond North America or terms beyond 30 days, please contact the factory for a quotation. Orders ship within 2-5 business days from date of receipt of order. If you require rush shipment please contact us at (858) 689-2755 or email info@vitrek.com for details.

XT9812 DC Electronic Load Units

vitrek xitron xt9812 front

XT9812

XT9812 LED Programmable Electronic DC Load, 150V

$1,570.00
vitrek xitron xt9812 front

XT9812B

XT9812B LED Programmable Electronic DC Load - 500V

$1,675.00

XT9812 DC Electronic Load – Options & Accessories

RB-XT9812

XT9812 LED Programmable Electronic DC Load Rack Adapter, Black  

$326.00

XT131

RS232 to RS232 Cable

$52.00

Rentals

The 2000 Series Portable Calibration Instruments and accessories are available for rent. Please contact the factory for a rental quotation on the items and period of time you desire. Vitrek offers a generous rental allowance for rentals that are converted to a purchase and rentals of 12 months come with a 10% buyout.