Railroad Track Quality
Transportation Railroad Track Quality Surface Description
Fork Lift To Pallet Position
Transportation Fork Lift To Pallet Position Distance Description
Sheet Metal Brake Bending
Industrial Sheet Metal Brake Bending Tolerances Description
PCIe CobraMax Express 8-Bit Digitizer
Legacy Product – Contact Vitrek at info@vitrek.com for more information. PCIe CobraMax Express 8-Bit Digitizer CobraMax Express CompuScope 8-Bit, 4.0 GS/s, PCIe Digitizer / Oscilloscope Board Data Sheet With a maximum sampling rate of an impressive 4.0 GS/s, the CobraMax 8-bit PCIe Digitizer ensures rapid and efficient data acquisition. It boasts a true Effective Number of Bits (ENOB) of 7.6 bits at a 10 MHz input, guaranteeing accuracy in every bit of data collected. The CobraMax stands out with its expandable onboard digitizer sample memory, capable of handling up [...]
PCIe Razor Express 12-Bit Digitizer
Legacy Product – Contact Vitrek at info@vitrek.com for more information. PCIe Razor Express 12-Bit Digitizer Razor Express 12X2 CompuScope 12-Bit, 200 MS/s, PCIe Digitizer / Oscilloscope ** This product has been discontinued. We recommend the PCIe RazorEdge Express 14-Bit Digitizer ** Data Sheet The GaGe Razor 12X2 Express CompuScope PCIe digitizer board features 12-bit resolution with sampling rates up to 200 MS/s with true Effective Number of Bits (ENOB) of 9.6-bits with 10 MHz input. Onboard digitizer sample memory is expandable up to 8 GS (16 GB). [...]
DC Motor / Commutator Bar
DC Motor / Commutator Bar Industrial Dc Motor / Commutator Bar Depth Description Using a MTI Microtrak 4 laser triangulation sensor to measure a DC motor’s armature / commutator bar run out. We fitted a DC motor armature (rotor) in a lathe to spin it. The MTI laser head a DTS 50-20 has 50 mm standoff and a 20 mm measuring range. The laser was placed in a FS-5 magnetic  mount fixture and pointed at the commutator bars. The lathe was spun at 180 RPM and the commutator bar run out [...]
PCIe EON Express 12-Bit Digitizer
PCIe EON Express 12-Bit Digitizer EON Express CompuScope 12-Bit, 6 GS/s, PCIe Gen3 Digitizer / Oscilloscope Board Request Quote DataSheet The GaGe EON Express CompuScope PCIe Gen3 digitizer board features unprecedented speed and resolution in a 6 GS/s streaming digitizer with 1.75 GHz bandwidth and PCIe data streaming rates up to 6 GB/s. Onboard digitizer sample memory is expandable up to 8 GB and the EON Express supports FPGA based applications for real-time DSP functions. The EON Express can be combined with wideband downconverter models and PC solutions to be [...]
Cement Board Quality Control
Cement Board Quality Control Industrial Cement Board Quality Control Dimensions Description Introduction: Cement backer board is used as underlayment for tile floors, walls and counter tops. It is also used as exterior sheathing and in exterior stucco systems. Cement backer board has proven to be more durable than virtually any other underlayment if quality control and thickness is maintained. The Problem: A major cement board manufacturer was faced with the challenge to improve a board production line throughput and decrease the amount of waste in the process. Too thin of cement board [...]
PCIe Octave Express 14-Bit Digitizer
PCIe Octave Express 14-Bit Digitizer Octave Express 83XX CompuScope 14-Bit, 125 MS/s, PCIe Digitizer / Oscilloscope ** This product has been discontinued. We recommend the PCIe RazorEdge Express 14-Bit Digitizer ** View Recommended Product Data Sheet The GaGe Octave Express 83XX CompuScope PCIe digitizer card features 14-bit resolution with sampling rates up to 125 MS/s with true Effective Number of Bits (ENOB) of 11.1-bits with 10 MHz input. Onboard digitizer sample memory is expandable up to 8 GS (16 GB). 2 or 4 Digitizing Input Channels 125 [...]
Extruder Die Flatness
Extruder Die Flatness Industrial Extruder Die Flatness Thickness Description Introduction: Extruder dies have a flatness specification that must be maintained or the parts being extruded will be out of tolerance and non-conformant, resulting in scrap and disruptions. Periodic inspection of the die for flatness, deformation, burrs, or other irregularities is required. Situation: A tool and die company approached MTI Instruments, requesting assistance with a new method for inspecting their 20 ft long die. Contact gauges on a gantry had been the previous method; Non-contact was now the preferred practice. Solution: [...]