ProTrak G: 2D/3D Laser
ProTrak G: 2D/3D Laser Compact Size 2D / 3D profiling sensor for automation and process monitoring REQUEST A QUOTE Download Data Sheet The ProfileTrak G series are compact profiling sensors that fit in tight spaces. These 2D/3D sensors provide accurate profiling, height, width and positioning measurement using the latest CMOS technology with fast measuring rate of up to 4,000 Hz, built-in display, excellent measuring accuracy, compatible interfaces such as Gigabit Ethernet and much more. Available with measuring ranges from 36 mm to 400 mm for applications such as profiling, height, width and [...]
Laser Thickness Gauge System-Legacy Product
Non-contact laser thickness gauge with digital thickness computation - This is a Legacy product. Contact Vitrek for information. Request Info for Replacement Product Download Data Sheet The Microtrak 3 Thickness Gauge System used for automated metal, fiberboard and cement board sheet production and QA/QC combines our proven non-contact laser triangulation sensors with a modular controller that can operate either as a standalone solution for displacement measurement or with a PLC/PC. The controller simplifies thickness applications through high speed internal sampling and digital thickness computation, reducing errors often encountered with traditional analog summing methods. The [...]
55CA: Single Channel Rugged Charge Amplifier
55CA: Single Channel Rugged Charge Amplifier Accelerometer charge conversion. Request Quote Download Spec Sheet Each 55CA Charge Amplifier provides one (1) channel of charge amplification, a buffered acceleration output signal, and an integrated (velocity) signal output. It also provides single-ended and differential outputs. About the 55CA: Single Channel Rugged Charge Amplifier Accelerometer Charge Conversion The 55CA Charge Amplifier conditions and amplifies charge-mode accelerometer signals. It is a rugged device designed to be used in engine test cells and other environments where charge-mode accelerometers are used [...]
41CA: Dual Channel Rugged Charge Amplifier
41CA: Dual Channel Rugged Charge Amplifier Convert accelerometer charge signals into voltage signals Request Quote Download Brochure The 41CA Two Channel Charge Amplifier is used to convert accelerometer charge signals into voltage signals. Converted signals are then easily used by the PBS-4100 family of vibration analyzers. Two channels of amplification are provided. Each channel has separate gain and switchable test signals. Input Signal Configuration: Differential or Single Ended Channel gain settings: 1, 4, 10 mV/pC Highpass filter options: 0, 10, 15, 20, 25 Hz Lowpass [...]
CA1800: Rack-mount Multiple Channel Charge Amplifier
CA1800: Rack-mount Multiple Channel Charge Amplifier Precision test cell rack mounted accelerometer charge amplifier Request Quote Download Brochure This CA1800 provides up to eight (8) channels of precision charge amplification for accelerometers and other charge mode devices. Up to eight (8) channels of amplification Self contained compact 19 inch rack mountable chassis Independent gain settings for each channel All input connections on rear panel Buffered acceleration signals available on front panel Optional filtering available Complete operation guide available The Features and Advantages of Our CA1800: Rack-Mount Multiple [...]
TSC-4800A: Tachometer Signal Conditioner System
TSC-4800A: Tachometer Signal Conditioner System Programmable tachometer conditioner for engine monitoring and testing systems The state of the art speed resolver/signal conditioning unit capable of working with all types of engine speed signals. Whether you are testing engines with a long tooth or short tooth embedded N1 signal, if you have engines with older high-voltage tachometer generators, or if you are testing engines with the new offset tooth design, the TSC-4800A will condition all of these types of signals. Download Brochure About TSC-4800A Tachometer Signal Conditioner System Programmable tachometer [...]
PBS-4100R+ Test Cell Vibration and Balancing System
PBS-4100R+ Test Cell Vibration and Balancing System PBS-4100R+ Test Cell Vibration and Balancing System Request Quote Download Data Sheet April ‘25 Press Release The “one-shot” balancing solution for test cells is now enabled for ARINC 429 and 664 data. Designed for the vibration analysis and jet engine trim balancing of commercial and military aviation gas turbine engines, the PBS 4100R+ quickly isolates engine problems and locate troubles. Long renowned for its rapid configurabilty and intuitive user interface, it can now leverage digital data from the aircraft’s Engine Monitoring [...]
Engine Vibration and Balancing Principles
What do you think when you’re flying home, cruising at 30,000 feet and the drinks have just been served? Our engineers think about the ripple in the glass. That ripple signals vibration and is an indication that the engine may be in need of a balance. The MTII’s PBS-4100+ Series Turbine Vibration Analyzer/Balancing System was developed to ensure that Turbine engines run as efficiently as possible. Excessive vibration is detrimental for a host of reasons: energy intended for useful output is instead expended on the vibration vibration manifests as acoustic energy (noise), again wasting otherwise useful energy excessive [...]
Laser Thickness Gauge System Principles
The Microtrak™ 3 TGS system is specifically designed for thickness applications utilizing two lasers. The product can be used in a standalone configuration or easily interfaced with PLCs and PCs. Each module contains an integral LCD display and keypad for setup and display of measurements. A USB serial port also allows control by a laptop computer. Basic PLC or control input/output is provided by discrete digital I/O lines or a Modbus® interface. Laser Triangulation Principle The Microtrak™ 3 TGS system uses the principle of laser triangulation to perform a one dimensional measurement of a target. The [...]