MADE IN USA - BUILT FOR GLOBAL STANDARDS

Brand-MTI

Accumeasure OEM Boards

Accumeasure OEM Boards Custom High Accuracy OEM solutions for micro-positioning and feedback control applications Request Quote Data Sheet The Accumeasure MicroCap is a compact, custom designed, OEM capacitance board for high-precision non-contact displacement, thickness and gap measurement. The AccumeasureTM Microcap capacitance board allows rapid deployment for OEMs that require custom measurement solutions for micro-positioning, thermal correction, focusing and closed loop control applications. About Accumeasure OEM Boards The Accumeasure MicroCap is a compact, custom designed, OEM capacitance board for high-precision non-contact displacement, thickness and gap measurement. The AccumeasureTM Microcap capacitance board allows [...]

By |August 11th, 2017|0 Comments

Accumeasure Analog Capacitance System

AS-9000 Accumeasure System 9000 High-Resolution Analog Capacitance Measurement System An ultra-high precision capacitive gap and displacement measurement gauge offering true nanometer accuracy and stability. Lightweight, compact, and designed for fast setup, the AS-9000 delivers exceptional reliability for your most demanding non-contact metrology applications. Request Quote Data Sheet Accumeasure Probes Brochure Push/Pull Probes Brochure PRECISE. COMPACT. FAST. Nanometer-Level Resolution for Critical Metrology The Accumeasure System 9000 (AS-9000) is a high-resolution, capacitance-based instrument that provides the perfect solution to previously unattainable measurement [...]

By |August 11th, 2017|0 Comments

Navy Orders Avionics Test and Measurement Systems

The U.S. Navy wants new avionics test and measurement systems. Under the terms of a $109-million award, the Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey will buy 41 electronic consolidated automated support systems (eCASS) from Lockheed Martin. This test and measurement equipment helps soldiers and Marines troubleshoot and repair aviation electronics while at sea. Avionics, the electronics used in aircraft, support essential navigation and communications functions. With military aircraft, avionics typically include electro-optical, infrared, and other types of sensors for airborne radar, weapons systems, and heads-up displays. Military avionics also need to support electronic warfare systems, [...]

Fiber Optic Sensors Help Stop Subway Shutdown

Fiber optic sensors will help keep commuters moving between Manhattan and Brooklyn this year and beyond. Recently, New York Governor Andrew Cuomo announced that New York City’s Metropolitan Transit Authority (MTA) would not close the L train tunnel for a planned 15-month repair project. Instead, the MTA will use technology-driven solutions to keep the tunnel open and operational for weekday riders. In a joint statement, a panel that included engineering experts from Columbia and Cornell explained that "The L Train Tunnel project gives us the opportunity to integrate technologies and methods that have never been used before in a [...]

By |January 24th, 2019|Categories: Application Notes-MTI, Brand-MTI, Case Studies-MTI, Industry-Automotive, Industry-Sensors, Industry: Transportation, Products-MTI-Laser/Fiber Optic, Z-REPUB, z1|Comments Off on Fiber Optic Sensors Help Stop Subway Shutdown

MICROTRAK 4: 1D Laser Displacement Sensor

MICROTRAK 4: 1D Laser Displacement Sensor Accurate and repeatable displacement measurements from highly reflective to dull surfaces Request a Quote Download Microtrak 4 Brochure Compact digital laser displacement sensor head with stable and accurate measurements The latest 1D laser displacement sensor from MTI provides excellent speed and accuracy for even the most difficult applications and provides data output and power through a single USB cable. The MicroTrak 4 is the ultimate 1D laser sensor for measuring height, thickness, displacement, vibration, and more, with a sensor frame rate of 40k Samples/sec. and [...]

By |August 11th, 2017|Comments Off on MICROTRAK 4: 1D Laser Displacement Sensor

3D Integrated Circuits Use Capacitive Sensing to Ensure Coplanarity

Three-dimensional (3D) integrated circuits (ICs) feature silicon wafers and dies that are stacked vertically for improved device performance. By using the Z-axis, 3D ICs can overcome the power and footprint limitations associated with two-dimensional (2D) integrated circuits. Yet 3D ICs need coplanar surfaces to contact all of the pads, pins, and pillars. To determine coplanarity, semiconductor manufacturers measure the angle and gap between two planes. Bonding tool actuators use these measurements to adjust components and ensure that all device pins and solder balls reside on the same geometric plane. This process, active parallelism compensation, promotes proper bonding without residual [...]

By |January 18th, 2019|Categories: Application Notes-MTI, Brand-MTI, Industry-Consumer Products, Industry-Electronics, Industry-Manufacturing, Industry-Semiconductor, Industry-Semiconductor-MTI, Industry-Sensors, Z-REPUB, z1|Comments Off on 3D Integrated Circuits Use Capacitive Sensing to Ensure Coplanarity

Oiling System Uses Capacitive Sensing to Detect Water Contamination

Water contamination can reduce the life of lubricants and increase the frequency of maintenance and repairs. If corrective action isn’t taken before an out-of-limit incident occurs, operational costs can escalate. When unplanned maintenance disrupts operations, productivity suffers and technicians may focus on a quick fix instead of the root cause. To detect water contamination in oil systems, in-line capacitance probes can be used. These flexible, off-the-shelf devices provide automatic and continuous monitoring. Yet checking moisture levels isn’t just about enhancing reliability or eliminating corrosion. In-line capacitance probes improve operations by supporting a proactive approach to maintenance. How In-Line Capacitance [...]

By |January 4th, 2019|Categories: Application Notes-MTI, Brand-MTI, Industry-Energy, News-MTI-Instrumentation, Z-REPUB, z1|Comments Off on Oiling System Uses Capacitive Sensing to Detect Water Contamination

Fiber Optic Sensor Principles

The Fotonic Sensor™ is a non-contact instrument, which uses the fiber optics lever principle to perform displacement measurement, vibration analysis and surface-condition measurements. The Fotonic Sensor transmits a beam of light through a flexible fiber-optic probe, receives light reflected from a target surface, and converts this light into an electrical signal proportional to the distance between the probe tip and the target being measured. A simplified example of the fiber optic principal is shown in Figure 2. The output signal voltage from the fiber optic sensor is then used to determine position, displacement, vibration amplitude, frequency and waveshape of a [...]

By |August 4th, 2017|Comments Off on Fiber Optic Sensor Principles

The Top Five Trends Impacting Test and Measurement for 2019

With 2019 upon us, we know everyone is thinking about what's next in the Test and Measurement industry.   We also know that without test and measurement equipment, engineers can't accurately and consistently prove that their mechanical or electronic devices perform as required. When they don't work, engineers also need to determine why and how to fix them. All of this leads to innovative thinking on how to test and measure even better by taking advantage of rapidly growing trends such as digitization, software, additive manufacturing, the Internet of Things (IoT), and new sensing applications that are driving advances in T&M. [...]

By |December 20th, 2018|Categories: Articles-MTI, Blog, Brand-MTI, Industry-Compliance Testing, News-MTI, z1|Comments Off on The Top Five Trends Impacting Test and Measurement for 2019

Offshore Wind Supply Chain Uses MTI Capacitance Sensors

Capacitance sensors from MTI Instruments are an important part of the supply chain for offshore wind (OSW) in New York State. According to a recent report from the Center for Economic Growth (CEG), New York’s Capital Region is home to MTI Instruments and dozens of other manufacturers who support this growing form of wind power. The Capital Region also offers essential infrastructure for OSW. As the CEG report explains, the New York State Energy Research Development Authority (NYSERDA) has assessed 54 waterfront sites for OSW-related projects such as component staging, manufacturing, and fabrication. Two of the most promising sites [...]

By |December 18th, 2018|Categories: Application Notes-MTI, Brand-MTI, Industry-Energy, News-MTI, Products-MTI-Capacitance, Z-REPUB, z1|Comments Off on Offshore Wind Supply Chain Uses MTI Capacitance Sensors
Go to Top