MADE IN USA - BUILT FOR GLOBAL STANDARDS

Industry-Manufacturing

Vitrek featured in Appliance & HVAC Report

Click here to download a copy of this article featuring Vitrek Products!   Click here to download a copy of this article featuring Vitrek Products!      

By |January 23rd, 2020|Categories: Articles-Vitrek, Brand-Vitrek, Industry-Consumer Products, Industry-Manufacturing, News-Vitrek, Products-Vitrek, z1|Comments Off on Vitrek featured in Appliance & HVAC Report

Position, Displacement, and Vibration Measurement with Precision, High Resolution, and Flexibility

The MTI-2100 Fotonic™ sensor uses advanced fiber optics and electronics to precisely measure position, displacement, and vibration. This high-resolution, non-contact metrology system supports a wide range of interchangeable fiber-optic probes and works with almost any surface, including metallic, composite, plastic, glass, ceramic, or liquid. Made in the USA by MTI Instruments, the MTI-2100 Fotonic™ features a modular design and supports application-specific requirements in R&D, quality, and process control. With its dual channel capabilities, the MTI-2100 Fotonic™ sensor allows users to make simultaneous measurements, such as for structure dynamics and modal analysis. All probe modules have two distinct operating ranges [...]

By |November 14th, 2019|Categories: Application Notes-MTI, Brand-MTI, Industry-Aerospace, Industry-Automotive, Industry-Compliance Testing, Industry-Consumer Products, Industry-Government/Military, Industry-Manufacturing, Industry: Transportation, News-MTI-PBS, Products-MTI-Engine Balancing, Z-REPUB, z1|Comments Off on Position, Displacement, and Vibration Measurement with Precision, High Resolution, and Flexibility

How the Aviation Industry Solves Vibration and Balancing Challenges

The aviation industry spends significant amounts of time and money on problems caused by engine vibration. Imbalance, the most common cause of engine vibration, happens because of bird strikes and other impacts, but also because of natural wear and corrosion that redistribute mass. In turn, out-of-balance parts can result in cabin noise, metal fatigue, and cracked turbine, fan, or compressor components. In the most extreme cases, catastrophic engine failure may result MTI Instruments, a worldwide supplier of precision measurement solutions, makes equipment for monitoring vibration levels and balancing rotors. For maintenance, repair and overhaul (MRO) crews who want to [...]

PBS-4100R+ Test Cell Vibration and Balancing System

PBS-4100R+ PBS-4100R+ Test Cell Vibration & Balancing System The industry-standard turbine vibration analysis and balancing tool engineered specifically for test cell and MRO environments. Deliver comprehensive vibration assessment and precise rapid balancing with seamless integration into your facility's data acquisition and control systems. Request Quote Download Data Sheet April ‘25 Press Release POWERFUL. PRECISE. INTUITIVE. Advanced Digital Engine Vibration Analysis for Test Cells The PBS-4100R+ is the premier rack-mounted vibration analysis and engine trim balance system designed for [...]

By |August 11th, 2017|Comments Off on PBS-4100R+ Test Cell Vibration and Balancing System

Press Release: Vitrek Releases Ultra-High Accuracy (0.024%) PA920 Series Power Analyzer

Vitrek’s New Ultra High Accuracy Power Analyzer Sets New Standard for Price/Performance The PA920 combines industry-leading power measurement accuracy (0.024%, 20Hz-1KHz), innovative multi-channel Virtual Power Analyzer (VPA) architecture; expansive harmonics analysis capabilities, built-in library of environmental compliance tests with market-leading affordability.   […]

By |October 20th, 2019|Categories: Brand-Vitrek, Industry-Compliance Testing, Industry-Manufacturing, Industry-R&D, New & Press Releases, News-Product Updates, News-Products, Press Releases-Vitrek, Products-Vitrek-Power-Analyzer, z1|Comments Off on Press Release: Vitrek Releases Ultra-High Accuracy (0.024%) PA920 Series Power Analyzer

White Paper: Precision Power Analyzers

White Paper  All the tools needed to study and optimize virtually any power project in a single instrument Introduction The design of any power conversion system requires the measurement of a large range of electrical parameters that could be made using a lab bench full of instruments. The precision power analyzer pulls all of these measurements into a single instrument replacing meters, oscilloscopes, chart recorders, harmonic analyzers and other devices. This paper will provide a basic overview of the functions and capabilities of high-performance power analyzers. Examples of these functions and how to apply [...]

Engine Vibration and Balancing Principles

What do you think when you’re flying home, cruising at 30,000 feet and the drinks have just been served? Our engineers think about the ripple in the glass. That ripple signals vibration and is an indication that the engine may be in need of a balance. The MTII’s PBS-4100+ Series Turbine Vibration Analyzer/Balancing System was developed to ensure that Turbine engines run as efficiently as possible. Excessive vibration is detrimental for a host of reasons: energy intended for useful output is instead expended on the vibration vibration manifests as acoustic energy (noise), again wasting otherwise useful energy excessive [...]

By |August 5th, 2017|Comments Off on Engine Vibration and Balancing Principles

Laser Thickness Gauge System Principles

Overview of the Microtrak™ 3 TGS Laser Thickness Measurement System The Microtrak™ 3 TGS is a high-precision laser thickness measuring device engineered for non-contact applications that demand reliable and repeatable results. Utilizing dual laser thickness sensors, this system offers accurate laser thickness measurement across a variety of surfaces and materials. Whether deployed as a standalone laser thickness gauge or integrated into a larger system using PLCs or PCs, the Microtrak™ 3 TGS provides versatile, industrial-grade measurement performance. It's ideal for environments requiring laser panel thickness measurement, laser thickness scanning, or laser gauging of rolled goods, sheets, and extrusions. [...]

By |August 5th, 2017|Comments Off on Laser Thickness Gauge System Principles

Vitrek featured in Bodo’s Power Systems

Click here to Download a copy of this article! Click here to Download a copy of this article!

By |August 13th, 2019|Categories: Articles-Vitrek, Brand-Vitrek, Industry-Electronics, Industry-Energy, Industry-Manufacturing, Industry-R&D, News-Vitrek, z1|Comments Off on Vitrek featured in Bodo’s Power Systems

Five Common Mistakes with Semiconductor Wafer Measurement

Semiconductor wafer measurement requires a high degree of precision. The right metrology equipment and inspection processes are important, but so is procedural consistency and attention to detail. If you’re not getting the results you want, it’s time to look beyond the measurements. With bare semiconductor wafers, users need to avoid these five common mistakes. Mistake #1 | Turning the Device Off Most users turn on metrology devices only when it’s time to use them. As soon as semiconductor wafer measurement is complete, the devices are turned off. This reduces electricity consumption but also introduces thermal instability that can cause [...]

By |August 9th, 2019|Categories: Application Notes-MTI, Brand-MTI, Industry-Compliance Testing, Industry-Consumer Products, Industry-Electronics, Industry-Manufacturing, Industry-Semiconductor, Industry-Semiconductor-MTI, Z-REPUB, z1|Comments Off on Five Common Mistakes with Semiconductor Wafer Measurement
Go to Top