MTI Video: Wafer Inspection & Metrology Startup (Proforma 300iSA)
https://youtu.be/mawagL6Yg3U
MTI Video: Wafer Inspection and Metrology Tutorial (Proforma 300i)
https://www.youtube.com/watch?v=nGkbpG2sz_k Learn More Download this brochure to learn more about the Proforma 300i wafer measurement system for semiconducting and semi-insulating wafers. This article in AZO Sensors also provides information.
TIRE TREAD INSPECTION WITH 1D LASER SENSOR
Tire manufacturers wants to satisfy their customers, and protect themselves from liabilities, manufacturers are moving to 100% tire inspection for defects and abnormalities. Defects not only cause potential safety issues but they can also introduce unwanted vibration into the vehicle suspension system. Belts can be overlapped, or not cover the complete tire surface, causing weak or bubbled areas and imbalances. The tread depth can be too shallow, leading to decreased service life. An uneven tire can cause excessive runout and vibration. MTI was approached by a major manufacturer requesting a solution to measure tread depth, runout and blistering. They [...]
Torque Converter
Industry Automotive Applications Torque Converter Measurement Type Surface Description Since minute defects in the torque converter casing wall thickness can result in unacceptable and dangerous torque converter expansion, a precision measurement system was needed to measure the impeller hub displacement and thus the torque converter axial displacement. An AC dynamometer would be required to spin the torque converter at a high rate of speed while a fast response hydraulic system is needed to pressurize the converter to pressures up to 150 psi. MTI’s MicroTrak laser sensor was selected because it offered [...]
Case-In-Point: Step Height Measurement (Thickness) of Copper Foil or EV Battery Film on a Roller Rig GalleryCase-In-Point: Step Height Measurement (Thickness) of Copper Foil or EV Battery Film on a Roller Rig
Application Notes-MTI, Brand-MTI, Industry-Automotive, Industry-Battery, Industry-Compliance Testing, Industry-Consumer Products, Industry-Sensors, Industry: Transportation, Products-MTI-Capacitance
Case-In-Point: Step Height Measurement (Thickness) of Copper Foil or EV Battery Film on a Roller Rig
Step Height Measurement (Thickness) of Copper Foil or EV Battery Film on a Roller Rig Leverage MTI Instruments’ digital Accumeasure system to measure the thickness of the material used as anode and cathode plates in rechargeable Li-Ion battery cells Many roll-to-roll finishing processes typically use a calender, or series of hard pressure rollers, to deliver smooth, high-quality products of plastic, textile, or paper (Fig 1). Ensuring a consistent material thickness, however, depends on the ability to monitor, and maintain, a precise gap between rollers. This application note describes a quick and easy means for roller gap measurement. Introduction [...]
FIBER OPTIC PROBES MEASURE STATOR BAR VIBRATION
[Application Note 11718] One of the primary concerns in large generator design is vibration. Excessive vibration can lead to premature breakdown of insulation and other materials, ultimately resulting in early failure of the generator itself. The Problem A leading manufacturer of power generating equipment required a sensing system able to measure stator bar vibration in a partial generator mockup. Specifically, the company’s multi-day testing program demanded a sensing system that was immune to the large magnetic field generated by live stator bars capable of withstanding high heat built up from prolonged testing, and compatible with a proprietary stator bar [...]
The Basics of Insulation Resistance Testing and Why It’s So Important
In high-voltage and industrial electrical systems, insulation is the first line of defense against equipment failure, electrical shock, and system downtime. Over time, insulation materials are subjected to electrical stress, temperature variation, humidity, and mechanical wear — all of which degrade performance and increase leakage current. That’s where the insulation resistance test comes in. Whether you’re maintaining high-voltage equipment, troubleshooting faults, or ensuring compliance, measuring insulation resistance is a critical step in identifying early signs of wear, aging, or potential failure. With the right equipment and understanding, you can prevent shocks, avoid short circuits, and extend the lifespan of [...]
Support Services
Signatec continually strives to provide the best support possible for our customers through the following services: Product Downloads Signatec products are continually improved upon through updates to firmware logic and software. To maximize the performance and experience with Signatec products, we highly recommend for customers to periodically check for new product material updates that include: ● Data Sheets ● Operator Manuals ● Firmware Logic Updates ● Software Updates Access to the most up-to-date product materials for both current and obsolete products are provided through our web site for all registered users. If you are not already registered with Signatec, [...]
New Video from MTI! Closed-loop System to Monitor and Control Conductive Film Thickness During Manufacturing
Closed-loop System to Monitor and Control Conductive Film Thickness During Manufacturing This animation demonstrates how Accumeasure with capacitance probes can be used as a solution to measure and control conductive film thickness in a production line where these measurements can be fed back to a controller which adjusts the roller(s) to increase or decrease the gap to keep the film’s thickness within specification. The MTI Instruments Capacitive system has greater than 100 nm resolution and 1um accuracy. This solution is appropriate for measuring the following: EV battery plate thickness Non-woven conductive material thickness Conductive film thickness Roll-to-roll conductive [...]
Safety Recommendations for Setting Up a Hipot Testing Workstation
Hipot testing is necessary for ensuring the electrical safety compliance of electronic equipment. However, testing the voltage on commercial equipment can result in errors and even death if the operators have not been properly trained on the importance of establishing a safe testing environment. Before any tests are performed, operators should be thoroughly trained on the effects of electrical currents on the human body, the importance of safety interlocks, and how to program the necessary tests and store them in memory. If operators lack the appropriate training, setting up a safe hipot testing workstation would be for naught. After prioritizing [...]